Subject: Re: PHF Float Setting Spec Question
Author: Paul P. Linn
Date: Mar 26, 2005, 4:00 AM
Post ID: 1718602590
Karl,
I've always set my floats as illustrated in fig 14. Just ensure that
when in the upside down position they are parallel to the float chamber
face as they say in the write up. I've never worried about actual
measurements at all. As for their measurements, make one parallel and
then measure it to see what it comes out to. It probably is 36mm.
Paul
Karl Kologiski wrote:
<blockquote cite="mid891755563-1463-@boing.topica.com"
type="cite">
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Help us support US Troops – Just Register Here.
http://click.topica.com/caadjGFb1dfltb6GIoLa/PermissionData
-------------------------------------------------------------------
I am running a set of PHF's on my elo and am trying to set the floats. I
looked up the specs in the Dellorto manual but they are a little confusing.
They show the specs at 18.5 + 17.5 mm
http://www.ducatimeccanica.com/float_levels.html
Setting them a 18.5 or 17.5 is way to high. Do you add the values together
(36 mm) and if so why not just say 36mm. Does anyone have any ideas on how
to read this ?
Skip & Jane Kologiski
Bird at The Wheel Vintage Motorcycle Stuff
http://home.earthlink.net/~kkologiski/bird.html
Central Florida Reps for the MGNOC (Moto Guzzi National Owners Club).
Fla Guzzi Sitehttp://www.thisoldtractor.com/fl_mgnoc/
----- Original Message -----
From: "Ted Ward" <ju-@astrocomma.com>
To: <Loopfram-@topica.com>
Sent: Friday, March 25, 2005 10:00 PM
Subject: Re: exhaust - stuff
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
How would you like a Complimentary Kmart $500 GiftCard by
participating in our special promotion?
http://click.topica.com/caadi1cb1dfltb7mpEHa/RewardsVenue
-------------------------------------------------------------------
Will they bolt on or do I need some sort of adapters or brackets?
----- Original Message -----
From: "thomas halchuk" <halc-@comcast.net>
Ted
Get aset of Dunstall clones from JC Whitney. 108.00 a pair delivered
Tom
----- Original Message -----
From: "John Chicoine" <jchic-@mestek.com>
To: <Loopfram-@topica.com>
Sent: Thursday, March 24, 2005 3:46 PM
Subject: Re: exhaust - stuff
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started
Now!
http://click.topica.com/caadeMnb1dfltb7hDhIa/TaxBrain
-------------------------------------------------------------------
Ted:
You could have a blockage in one or both mufflers that's causing excessive
back pressure if they're that deteriorated. Sounds like you need a new set
regardless.
John
----- Original Message -----
From: "Ted Ward" <ju-@astrocomma.com>
To: <Loopfram-@topica.com>
Sent: Thursday, March 24, 2005 3:27 PM
Subject: exhaust - stuff
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Start your free trial today and pay only
$5.95 for shipping & handling.
http://click.topica.com/caadfBTb1dfltbN7eKTa/Nexiderm
-------------------------------------------------------------------
I got my transmission back in again (!) and my distributor back
in with new points and yet another new condensor (just in case).
Clutch is working great, but bike still won't run worth a crap.
One thing that is weird, I have stock mufflers ('74 eldo) and
both mufflers have recently begin crapping out their internals.
The little round pipes are sticking out of the pea holes at the
end of the mufflers, one sticks out about 2 inches and is
completely loose on the inside.
Is there anything I can do about this or are the mufflers just
shot? This wouldn't cause the bike to run badly would it?
Ted Ward
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Buy any items from KMART from clothes to tool with a $500 Kmart
gift card. All you have to do is click on the link and recieve
your gift!
http://click.topica.com/caadi1fb1dfltbN7eKTf/RewardsVenue
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get.
0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to
2% Cashback Bonus® reward on your purchases & 100% fraud
protection.
http://click.topica.com/caadfzUb1dfltb7hDhIf/DiscoverCard
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Help us support US Troops - Just Register Here.
http://click.topica.com/caadjGFb1dfltbNPab1f/PermissionData
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Start
your free 14-day trial today!
http://click.topica.com/caadfBPb1dfltb7mpEHf/Nexiderm
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get…
0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to
2% Cashback Bonus® reward on your purchases & 100% fraud
protection.
http://click.topica.com/caadfzUb1dfltb6GIoLf/DiscoverCard
-------------------------------------------------------------------