Subject: RE: Shift Offset Bracket
Author: John Ulrich
Date: Mar 17, 2005, 6:54 PM
Post ID: 1718560086
Keith Ruff wrote:
| the bracket itself is a bit too wide where it mates up to the linkage arm - it's a tight fit and binds as the linkage |
*** Mine fit fine. file it down to suit.
| Also noticed that the SOB was sliding a bit on the gear selector shaft. Could that be because of this binding? |
*** I took a little off the saddle mount faces on mine to "pinch" it to
the shaft. You do need to use some loctite. I used some 640 sleeve
retainer to "lock" it in place.
Later,
JU