Subject: MORE eldo dash wiring help Paul Linn?
Author: brian c
Date: Feb 9, 2005, 8:36 AM
Post ID: 1718361097
Thank you for the clarification- I re-wired the connections last night
as below, and I am still having a problem- the fuse keeps blowing
between the white/black wire and the blue/black one at the fuse
terminal???? man, sometimes I hate wiring.
Paul P. Linn wrote:
Ok, here goes. Neutral light - green wire from switch Oil pressure light - gray wire from oil pressure unit Generator light - red wire from generator Jumper (white/black) from the neutral light to the oil pressure light to the generator light to the fuse panel. These are your power wires. Lights indicator - as you have it. Case of light grounds to frame. Paul 73 Eldo "Elvira" 949 conversion 74 Eldo "Daisy" undergoing a full police restoration -----Original Message----- From: brian c [mailto:bcoo-@creedon.com] Sent: Tuesday, February 08, 2005 11:36 PM To: Loopfram-@topica.com Subject: eldo dash wiring help needed- idiot lights? Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Like music? Get a CD player on us. Click here. http://click.topica.com/caac8ucb1dfltb6GIoLa/PermissionData ------------------------------------------------------------------- I don't know if I can link photos here, but I am going to try- at any rate, I am re-wiring this bike, a 73 eldo with dual dash, and I have not done one of these in a while and i can't figure it out from my wiring diagram- I have 4 idiot lights, two of them on the left side have two spade connectors each and the other 2 have a single female connector each- 2 spade connectors: Neutral - has green wire from neutral switch on one and a short wire going to the oil pressure spade connector on the other. Oil Pressure- has grey wire from oil pressure sending unit on one and the shore wire to neutral indicator on the other Female connectors: Generator- has on red wire coming from the generator lights indicator- has one yellow/black wire from light circuit now, from my wiring diagram for this bike it looks like there should be a white/black wire coming from the fuse block to the generator light as well- is this correct, and if so, how am I sopposed to connect it? It also loks liek there should be a wire connecting the generator light to the oil pressure light- if so, how do I connect it? just splice it in? http://pg.photos.yahoo.com/ph/wfrwasher/detail?.dir=/f924&.dnm=fba9.jpg&.src =ph http://pg.photos.yahoo.com/ph/wfrwasher/detail?.dir=/f924&.dnm=784e.jpg&.src =ph Berkeley, CA '73 Eldo 74 eldo 73 v7sport Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- We have the 42 Inch Plasma TV you've been looking for!! Sony or Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your wall today! Click Below http://click.topica.com/caac8uBb1dfltb6GIoLf/ExclusiveRewards ------------------------------------------------------------------- |
Berkeley, CA
'72 Eldo
'74 850-T