Subject: Re: Swingarm removal
Author: Ted Ward
Date: Feb 4, 2005, 10:40 PM
Post ID: 1718337919
This is a multi-part message in MIME format.
------=_NextPart_000_0124_01C50B1B.4629BC50
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
That did the trick Mark, thanks. I used an adjustable wrench across the 2 allen wrenches as a screwdriver was just bending the wrenches.
Another question now, I put in a new tranny input gear last time I had this apart and have only put about 10 miles on the bike since, but the tranny input gear already shows small signs of wear where the other gear had deep grooves. I looked at the clutch plates and they are made of 3 (I think) plates riveted together and it doesn't look like the plates are perfectly aligned. Do I need to get new clutch plates? The thickness of the clutch material shows no wear.
Thanks again
Ted
----- Original Message -----
From: Mark Etheridge@Moto Guzzi Classics
To: Loopfram-@topica.com
Sent: Friday, February 04, 2005 10:55 PM
Subject: Re: Swingarm removal
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Would You Like Your Money 2-Day? Get started now! TaxBrain Online.
http://click.topica.com/caac8vpb1dfltbNPab1b/TaxBrain
-------------------------------------------------------------------
Takes a special tool or take two allen wrenches,or back side of drill bits that fit in little holes.back off nut,put bits,or allen wrenches in holes,put Big screw driver between and turn lefty loosey,or righty tighty,if they are really tight,squirt with wd 40 and give them three hard smacks with a good heavy hammer on there faces.lefty loosey out.righty in.WORSE case,put a vice gripes on them,and call me for free used ones,Mark
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started
Now!
http://click.topica.com/caac8vhb1dfltbNPab1g/TaxBrain
-------------------------------------------------------------------
------=_NextPart_000_0124_01C50B1B.4629BC50
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2523" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>That did the trick Mark, thanks. I used an
adjustable wrench across the 2 allen wrenches as a screwdriver was just bending
the wrenches.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Another question now, I put in a new tranny input
gear last time I had this apart and have only put about 10 miles on the bike
since, but the tranny input gear already shows small signs of wear where the
other gear had deep grooves. I looked at the clutch plates and they are made of
3 (I think) plates riveted together and it doesn't look like the plates are
perfectly aligned. Do I need to get new clutch plates? The thickness of the
clutch material shows no wear.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks again</FONT></DIV>
<DIV><FONT face=Arial size=2>Ted</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=Gu-@aol.com href="mailto:Etheridge@Moto Guzzi Classics">Mark
Etheridge@Moto Guzzi Classics</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, February 04, 2005 10:55
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Swingarm removal</DIV>
<DIV><BR></DIV><PRE>Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Would You Like Your Money 2-Day? Get started now! TaxBrain Online.
<A href="http://click.topica.com/caac8vpb1dfltbNPab1b/TaxBrain">http://click.topica.com/caac8vpb1dfltbNPab1b/TaxBrain</A>
-------------------------------------------------------------------
</PRE><FONT face=arial,helvetica><FONT size=2 PTSIZE="10">Takes a special tool
or take two allen wrenches,or back side of drill bits that fit in little
holes.back off nut,put bits,or allen wrenches in holes,put Big screw driver
between and turn lefty loosey,or righty tighty,if they are really tight,squirt
with wd 40 and give them three hard smacks with a good heavy hammer on there
faces.lefty loosey out.righty in.WORSE case,put a vice gripes on them,and call
me for free used ones,Mark</FONT><PRE>Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started
Now!
<A href="http://click.topica.com/caac8vhb1dfltbNPab1g/TaxBrain">http://click.topica.com/caac8vhb1dfltbNPab1g/TaxBrain</A>
-------------------------------------------------------------------
</PRE></BLOCKQUOTE></FONT></BODY></HTML>
------=_NextPart_000_0124_01C50B1B.4629BC50--