Subject: Re: Dual disk setup
Author: Greg Field
Date: Feb 2, 2005, 9:21 AM
Post ID: 1718321078
I can ask Bob if he'll make some more-but not until we've built a batch
of alternator brackets.
GF
On Wednesday, February 2, 2005, at 07:57 AM, Scott Miller wrote:
| Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Get a FREE* Portable Satellite Radio - yours to keep! Click Here! http://click.topica.com/caac8uyb1dfltb6KFeCa/PortableSatellite Radio Promotion ------------------------------------------------------------------- Thanks everyone. Is the spacer for the left disk a standard part or something that needs to be custom made? In either case, does anyone know of a source for the spacer? In looking back through the archives, Greg Field wrote about having Bob Nolan make up the spacer for his dual disk Eldo. Thanks. Scott Athens, GA Skip & Jane wrote: Some of the 74's came with a single disc brake set up. The lower sliders are the same as the ones on the 850t and early t3's. The tubes are Eldo only parts as they are tapered on the tops where they fit into the top trees, as the T models are not tapered and use a pinch clamp on the top tree. As to add a 2nd disc you need the proper disc spacer, and a rotor & disc from a T model. You can junction the 2nd brake line to the brake switch unit located on the top of lower tree. hope that helps Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- We have the 42 Inch Plasma TV you've been looking for!! Sony or Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your wall today! Click Below http://click.topica.com/caac8uBb1dfltb6KFeCf/ExclusiveRewards ------------------------------------------------------------------- |