Subject: Guzzi clutch plates
Author: tom short
Date: Nov 16, 2004, 6:31 AM
Post ID: 1717893461
Hi all,
Mark E. showed me how to tell a good plate from a worn one, even if
there lots of clutch material left.
What is important to check is the wear on the teeth of the disk. They
should be VERY square, not worn to little points. They should slide
firmly onto the clutch hub, and there should be no side-to-side play.
The Arizona Kid
LFL 009
Tom Short
AZ MGNOC Rep
Phoenix, AZ