Topica Loopframe_Guzzi Archive
 

Subject: Re: The collywobbles....

Author: Paul P. Linn

Date: Aug 20, 2004, 6:23 AM

Post ID: 1717387091


MG Cycle has the damper for it.

Paul
Midlothian, Va
MGNOC#19926
73 Eldo "Elvira" ongoing project
74 Eldo "Daisy"
----- Original Message -----
From: "Lenny Seidman" <lsei-@erols.com>
To: <Loopfram-@topica.com>
Sent: Friday, August 20, 2004 9:13 AM
Subject: Re: The collywobbles....


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacvgpb1dfltb6GIoLa/OmahaSteaks
-------------------------------------------------------------------

I have on off my Ambo that I need a replacement damper for. Any suggestions
on where to get one?

If Charlie doesn't have the complete set-up I'll dig mine out (bike is
totally disassembled at the present) and take some photos.


On 8/20/04 7:49 AM, "Ray Hale" <ray.-@sfcc.edu> wrote:

 Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacvgpb1dfltb2TIW8a/OmahaSteaks
-------------------------------------------------------------------

Charlie and Lannis,
Any chance either of you could get a photo of this, installed or
otherwise before it's over? Both would be great. That would help my
efforts in finding one or making something else work.
Thanks
Ray


Lannis wrote:
 

Charlie Mullendore wrote:
 
Hi Lannis,
From what I remember the stock Guzzi damper attaches with a bracket that


clamps around the right frame downtube and on the other end bolts to the


bottom of the lower fork yoke. There's a little curved piece that fits
into the underside of the yoke and is held in place with a bolt from
above. The damper then bolts onto this piece from underneath.

I think there's a n.o.s. damper and little curved piece in all of my
stuff, but don't think I have the clamp part. I'll check and see, if
you're interested. Cheers,

Charlie -

I am interested; if you can check and see how close you can come to
selling me a "kit", I'll take what you've got and make or source the
rest.

I'm about convinced that a damper will fix me right up....

Thanks!

Lannis

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacvgtb1dfltb2TIW8f/MyDietPatches
-------------------------------------------------------------------

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacvgtb1dfltb6GIoLf/MyDietPatches
-------------------------------------------------------------------

Entire thread: