Subject: RE: Stephen (RE: ID tag removal)
Author: stephen brenton
Date: Sep 3, 2003, 5:03 AM
Post ID: 1714382346
Don't work on the drive-pins from the outside.
Remove the steering assembly and bearings and push the pins out.
Put a piece of tape on the outside so when the pin comes loose it
doesn't fly away; these pins are real small.
Save the pins for reassembly, they are original and they still work.
-s.
bikeworx wrote:
Thanx for letting me use the tool, it will be much appreciated. Never removed a tag nicely before, let alone a loopframe. Any tips you (or anybody that has done this) would care to share? |