Subject: Re: Re:Slide Needles
Author: 3haw-@bluefrog.biz
Date: Apr 2, 2003, 6:29 PM
Post ID: 1712485510
Thanks Paul - Bob
----- Original Message -----
From: P67V7 <PAKu-@hotmail.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, April 02, 2003 7:49 PM
Subject: Re:Slide Needles
| Each style of needle has a diffrent diameter and taper which will change |
| amount of fuel passing through the carb into the engine at specific |
| of the needle depending on throttle opening. Conversly raising or lowering the needle in the slide by changing the clip will richen or lean out over the entire range of the taper of the needle. My Guzzi book shows a SV5 needle for the 850 and a SV5 or SV9 needle for |
| 750 My Dellorto book does not have the the specs for those needles. I would |
| both and see which needle has the bike run the best looking for changes above 1/4 to 3/8 and 3/4 throttle. Paul _________________________________________________________________ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail |