Subject: RE: DC charging system question
Author: Fred Sahms
Date: Feb 3, 2003, 12:28 PM
Post ID: 1711866190
Jtomel-@aol.com wrote:
With an INTERNAL ground (such as the generators used on
| Guzzis) you polarize by DISCONNECTING the FIELD lead and MOMENTARILY touching it to the BAT terminal on the regulator. With an EXTERNAL ground you just momentarily connect a jumper wire from the BAT to the GEN or ARM terminals of the regulator. |
So to do this I disconnect the FIELD lead *at the regulator?* and touch
it momentarily to the BAT terminal on the regulator?
Or do I disconnect the FIELD lead *at the generator?* and touch it
momentarily to the BAT terminal on the regulator?
Thanks!
73 Eldo (T-minus)
78 T3/949