Topica Loopframe_Guzzi Archive
 

Subject: RE: Eldo front suspension stripping problem

Author: David Szenasy

Date: Nov 2, 2002, 8:01 PM

Post ID: 1711321290

I guess I still don't understand....is the top plate pressed onto the forks?
Are you driving the forks away from the top plate, with your technique?
What about damage to the internal threads?

David Szenasy






 From: Fred Sahms <fr-@fredsgarage.net>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: RE: Eldo front suspension stripping problem
Date: Sun, 3 Nov 2002 03:04:16 +0000

I loosened up the top nuts and the pinch bolts, and gave the nuts a
whack with the deadblow hammer.


David Szenasy wrote:
 Help Guys! I can't seem to figure out how to get the top linking plate
off
of my front forks. My book shows a special tool, but I am sure there is

another way. Any Ideas? Also, should I choose to replace the bearings,

will I have trouble finding them?

David Szenasy






_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband.
http://resourcecenter.msn.com/access/plans/freeactivation.asp



73 Eldo (motor in the frame!)
78 T3/949


_________________________________________________________________
Unlimited Internet access -- and 2 months free! Try MSN.
http://resourcecenter.msn.com/access/plans/2monthsfree.asp

Entire thread: