Subject: Re: Nuts n' Bolts

Um perhaps I should clarify, I meant the length of the bolt for the lower
triple tree with turnsignal brackets and fork ears attached. I have neither
at my disposal right now.

Thanks.

PS Of course a 10mm nut goes with that bolt for the fork lower.

From: Christopher Mitchell <derby-@hotmail.com>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: Re: Nuts n' Bolts
Date: Mon, 28 Oct 2002 11:29:30 -0500

Well here is my first addititon to nut and bolt list, the clamping nut and
bolt at the bottom of the fork leg on a disk brake eldo is a socket head
10mm bolt, approximately 1 3/4 inches long.

Could someone measure the length on the lower triple tree bolt? I know its
a 10mm, but am unsure of the lengeth (I think its a little over 2 inches).

Thanks fellas,
Chris

From: Rich Marchand <rmarch-@earthlink.net>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: Re: Nuts n' Bolts
Date: Sun, 27 Oct 2002 17:07:56 -0500

Hi all,
If you don't have an Excel program on your 'puter you can download one
for
free here
http://office.microsoft.com/downloads/2000/xlviewer.aspx

Its a viewer and worked just fine for me.
Rich Marchand

----- Original Message -----
From: "jason telford" <jr-@avalon.net>
To: <Loopfram-@topica.com>
Sent: Sunday, October 27, 2002 4:13 PM
Subject: Nuts n' Bolts

There was a flurry of interest in obtaining the Dave Otis spreadsheet

eldo fasteners, so with his permission, I have simply posted it on my
cheesy website. Be sure to check out our science too!
http://plasterbath.chem.uiowa.edu/bikes.html

I saved it from Office 2000 mac version, but it should be portable to
the pc as well.
If you make additions to it (I suggest electronic parts, starter swaps,
Ambo fasteners, etc), send me a copy and I will post that as well.

Make

for a central depository so to speak.
Again, credit for it goes to Dave Otis, I have benefited from it as

have

many others.

Cheers,
Jason

_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband.
http://resourcecenter.msn.com/access/plans/freeactivation.asp

Subject: Re: Nuts n' Bolts

Author: Christopher Mitchell

Date: Oct 28, 2002, 8:41 AM

Post ID: 1711286228

Entire thread: