Subject: RE: threads inside back of crankshaft
Author: Ian Adkins
Date: Sep 18, 2002, 8:59 AM
Post ID: 1711036123
Fred,
If you can still get to the Loopframe web site I posted a simple method to
line up and compress the clutch plates using that shock boss.
If you can find it I will dig in my notes and find out what I wrote.
Actually....now that I think about it.....the thread pitch may be 1.5.
-----Original Message-----
From: Fred Sahms [mailto:fr-@fredsgarage.net]
Sent: Wednesday, September 18, 2002 11:35 AM
To: Loopfram-@topica.com
Subject: RE: threads inside back of crankshaft
Cool..my local bolt guy said 1.75 is easy, and 1.5 is very hard to come
by. I am trying to find a bolt to compress the pressure plate to
install the clutch w/o tweaking the intermediate plate. On the T3 there
are holes to see through. Not so on the Eldo.
Ian Adkins wrote:Fred,
I think 12 x 1.75. The thread is the same as the threads on the shock
boss....the part that threads into the frame.
73 Eldo (motor finally together)
78 T3/949