Subject: RE: Stainless steel hardware
Author: dj-@dotis.com
Date: Jun 13, 2002, 11:13 AM
Post ID: 1710426552
It all works, maybe the transmission bolts will not be 100% but this will make your
Ambo pretty and hold it together
On 13 Jun 2002 at 12:58, Jason wrote:
I pasted the Eldorado Fastener Kit from RockyPointCycle below.
They do not have a Ambassador kit currently - would anyone that has the
knowledge go through the Eldorado list below and let me now what parts are
compatible with a '70 ambassador. Thanks,
Eldorado Fastener KIt, $129.95, contains:
Description Qty.
Fuel Tank
Gas tank securing bolts 2
Subframe/Battery
Battery tray bolts 4
Battery tray bolts 2
Top crashbar mount bolts 2
Bottom crashbar mount bolts 2
Floorboard hinge bolts 4
Toolbox mounting bolts 4
Toolbox mounting bolts 2
Rear Fender
Rear fender to frame 2
Tail Light/Turn signals/Lic bracket
Rear light mount to fender 3
Rear light to mount on fender 2
Rear light bar to X piece 2
Shocks
Shock mount nuts 4
Rear shock nuts 4
Centerstand/Engine Mounts/Pass footpegs
Engine mount nuts 2
Centerstand lock-nuts 2
Passenger peg hinge bolts 2
Passenger peg mounting bolts 2
VR/Coil
Coil fastener bolts 2
Frame Ground (upper horn mount) bolt 1
Triple Clamp/Forks
Lower fork clamp bolts 2
Triple tree top nut 1
Handlebars
Handlebar to bar risers bolts 4
Risers to triple clamp bolts 4
LHS switch box clamp bolt 1
Clutch lever hinge screw 1
Headlight
Instr. panel to triple clamp dome nuts 3
Instrument gnd bolt (under instr. Cover) 1
Front Fender
Front brake hose to fender clamp bolt 1
Front fender to fork bolts 4
Front fender to fork bolts 2
Front fender to fork bolts 2
Front fender stay to fender bolts 4
Frt reflector nuts (Standard thread) 2
Final Drive/Swingarm/Rear Wheel
Rear drum brake lever arm clamp bolt 1
Rear axle pinch bolt 1
Rear brake strut bolt 1
Brake pedal clamp bolt 1
Brake lever hinge bolt 1
Engine Covers
Front engine cover bolts 3
Timing chest cover bolts 10
Timing chest cover bolts 4
Valve cover bolts 16
Oil pan bolts 6
Oil pan bolts 8
Generator cover bolts 4
Transmission
Rear transmission cover bolts 6
Rear transmission cover bolts 1
Engine
Starter mounting bolt (Top) 1
Starter mounting bolt (Bottom) 1
Generator pulley to crank boss 3
Generator mount to case 2
Ring Gear Bolts 8
Flywheel bolts 6
Rear main bearing flange 8
Distributor mounting bolts 2
Distributor adjustment bolt 1
Exhaust
Header pipe clamp bolt 2
Muffler clamp bolts 2
Header pipe cover clamp bolts 2
Brake Switch
Rear brake light switch mount screws 2
Seat
Rear seat grab handle bolts 2
(Front of) Seat to frame bolts 2
-----Original Message-----
From: Christopher Mitchell [mailto:derby-@hotmail.com]
Sent: Tuesday, June 11, 2002 9:16 AM
To: Loopfram-@topica.com
Subject: Re: Stainless steel hardware
Rocky Point Cycle does stainless kits for loops. The kit is based on the
spreadsheet made by Brian Murphy. Runs about $120-130 and comes with
everything bagged and labeled by part of the bike.
http://www.rockypointcycle.com/
| From: Charles Mullendore <Ambo-@netscape.net> Reply-To: Loopfram-@topica.com To: Loopfram-@topica.com Subject: Stainless steel hardware Date: Mon, 10 Jun 2002 20:55:34 -0400 Hi All, Where's a good place to get all the s.s. bolts, nuts and washers needed for my '71 Ambo restoration? Just need enough for one bike not boxes of 25 each |
| item. Chassis only right now, engine later. Thanks, Charlie __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ |
_________________________________________________________________
Chat with friends online, try MSN Messenger:http://messenger.msn.com
==