Subject: RE: bearings
Author: Tom Bowes
Date: Dec 5, 2001, 3:34 PM
Post ID: 1709083407
Jeff,
The swingarm oil seals and the fork seals are just generic metric seals,
available at any decent bearing/seal supply house. Seals are categorized
via O.D., I.D., and depth. The headstock bearings (for sure) and the
swing arm bearings (should be) are also available from the same sources.
As for the fork plugs, I would try and contact Mark at Moto Guzzi
Classics. He should have one around that will do the job.
Jeff Meegan wrote:
| Well, I imagine I need to get the swingarm oil seals and fork seals from a dealer, but what about bearings? The headstock bearings and swingarm bearings look like they should be available at a decent bearing supply store. What about the U-joint carrier bearing? Oh and are the threaded plugs that fit in the top of the fork tubes available anywhere? One is fine, but the other one is missing about 2/3 of it's threads. thanks jeff |
Tom
'70 (July '69) Ambassador
'82 V50-III
Shelby Township, Michigan