Subject: Re: Somebody's child ran away and fell into a bad crowd. :-)
Author: Dave Otis
Date: Sep 12, 2000, 4:44 AM
Post ID: 1702444499
I'm thinking that too, if a sleeve could be had to fit both the cylinder
and piston, and the pin position is ok, a rod end bushing could be made to
fit the piston pis and there ya go, from what I remember from my Chevy
building days, the bore of a 283 is about 3 3/4 inches, a 83 mm equates to
about 3 1/8 inches I think, have to do some calculating. The best part is
if this would work, you can buy forged Chevy piston/ring kits for about
$100.00 that would be enough to do 4 Guzzi engines.
At 06:58 PM 9/11/00 -0700, you wrote:
| dave- ahh, nope, but i'm gonna measure it out! lottsa chevy stuff around. andy h. '72 eldo ___________________________________________________________ T O P I C A The Email You Want.http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics |
Middletown MD
http://www.loopframe.com