Gregory Bender
 

Police 5: Fuse box to left push-pull switch

Created:

Updated:

// //

Applicable to these part numbers:

  1. Route the sheathed black wire from inside the headlight bucket to inside the dash.
  2. Inside the headlight bucket, the white/black wire (with a green marker) with the 4 mm male bullet terminal is plugged into the top of the fuse block: into receptacle two (count from the left, as when facing the headlight bucket).
  3. Inside the dash, the black wire (with insulation stripped and wire tinned with solder) is secured with a set screw to a terminal of the left push-pull switch. It does not matter which which set screw is used.
A good view of the connections inside a standard police headlight bucket.
A good view of the connections inside a standard police headlight bucket.

Photo courtesy of Richard Mattrass.

Another good view of the connections inside a standard police headlight bucket.
Another good view of the connections inside a standard police headlight bucket.

Photo courtesy of Richard Mattrass.

An excellent view of the connections inside a standard police dash.
An excellent view of the connections inside a standard police dash.

Photo courtesy of Robert Bear Wolfe (Aloha).

Another great view of the connections inside a standard police dash.
Another great view of the connections inside a standard police dash.

Photo courtesy of Richard Mattrass.