Gregory Bender
 

Step 1S: Headlight bucket connections

Created:

Updated:

// //

Headlight bucket connections:

Civilian V700

  1. The blue/black wire with a 4 mm male bullet terminal is plugged into the top of the fuse block: into receptacle four (count from the left, as when facing the headlight bucket).
  2. The two black wires with 4 mm male bullet terminals are plugged into the bottom of the fuse block: into receptacles six and seven (count from the left, as when facing the headlight bucket).
  3. The yellow wire with a 4 mm male bullet terminal is plugged into the far left side of the distribution panel: into the far left/front receptacle (count from the left as when facing the headlight bucket).
  4. The black wire with a 3 mm ring terminal is secured to the either of the screws that secures to the distribution panel to the headlight bucket.
  5. The black wire with insulation stripped and the wires tinned with solder is secured to either of the set screw terminals on the distribution panel.

Civilian Ambassador & Eldorado

  1. The two blue/black wires with 4 mm male bullet terminals are plugged into the top of the fuse block: into receptacles four and five (count from the left, as when facing the headlight bucket).
  2. The two black wires with 4 mm male bullet terminals are plugged into the bottom of the fuse block: into receptacles six and seven (count from the left, as when facing the headlight bucket).
  3. The yellow wire with a 4 mm male bullet terminal is plugged into the far left side of the distribution panel: into the far left/front receptacle (count from the left as when facing the headlight bucket).
  4. The black wire with a 3 mm ring terminal is secured to the either of the screws that secures to the distribution panel to the headlight bucket.
  5. The black wire with insulation stripped and the wires tinned with solder is secured to either of the set screw terminals on the distribution panel.

Connections from the main harness

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Photo courtesy of Gregory Bender.

Police Ambassador & Eldorado

  1. The two blue/black wires with 4 mm male bullet terminals are plugged into the top of the fuse block: into receptacles four and five (count from the left, as when facing the headlight bucket).
  2. The two black wires with 4 mm male bullet terminals are plugged into the bottom of the fuse block: into receptacles six and seven (count from the left, as when facing the headlight bucket).
  3. The yellow wire with a 4 mm male bullet terminal is plugged into the far left side of the distribution panel: into the far left/front receptacle (count from the left as when facing the headlight bucket).
  4. The black wire with a 3 mm ring terminal is secured to the either of the screws that secures to the distribution panel to the headlight bucket.
  5. The black wire with insulation stripped and the wires tinned with solder is secured to either of the set screw terminals on the distribution panel.
  6. The gray/black wire with a 4 mm male bullet terminal is plugged into the bottom of the fuse block: into receptacle one (count from the left, as when facing the headlight bucket).