Breather box - hose sizes

Moto Guzzi V700, V7 Special, Ambassador, 850 GT, 850 GT California, Eldorado, and 850 California Police models

Updated: 

  • Inlet hose (right side): ID = 18 mm (~ 1116 inch); Length = 60 mm (~ 2 38 inch)
  • Return hose (middle): ID = 8 mm (~ 516 inch); Length = 60 mm (~ 2 38 inch)
  • Atmosphere hose (left side): ID = 14 mm (~ 916 inch); OD = 17 mm (~ 1116 inch); Length = approximately 600 mm (~ 24 inch)

    Thanks to K. Ross Raymond who posted the following information on the old Yahoo! Loopframe_Guzzi news group (which has now moved to Groups.io).

    It is somewhat difficult to source an atmosphere hose with the proper ID and OD that is also oil tolerant. Here is one source for such a hose: Pelican Parts part number N-020-371-1-M21.

    Thanks to Charlie Mullendore of Antietam Classic Cycle for providing this alternative.

    I bought a length of silicone rubber hose from McMaster-Carr. Kinda of a brownish-black color, slips right up onto the breather box snug, thin wall so should fit into the bracket no problem. I don't use the bracket, but a vinyl covered P clamp from NAPA attached to the lower right bell housing bolt instead.