Main harness for the V35 III / V50 III

Part number: 19747120

USD $220.00

Main harness for the V35 III / V50 III

I duplicated an original main harness. In construction, I use the same gauge of wire, the same colors and tracers (stripes), the same length and sheathing, the same terminals, etc. All terminals are of the double crimp, strain relief variety.

Note: Main harnesses comprise the main - or primary - wiring harness. Each motorcycle also uses ancillary sub-harnesses. The individual sub-harnesses are sold separately.

Originally, Moto Guzzi routed the wires to the ignition switch through the Molex connector. I've found this to be troublesome. I prefer to route the wires directly to the ignition switch without going through the dash harness or any connector. Please let me know if you would like this modification.

15 terminal connection that connects to the dash and headlight sub-harnesses.
Direct link to image

12 terminal connection that connects to the left handlebar switch sub-harness.
Direct link to image

4 terminal connection that connects to the right handlebar switch sub-harness.
Direct link to image

6 terminal connection that connects to the alternator sub-harness.
Direct link to image

Socket for starter relay.
Direct link to image

Socket for flashing lights relay.
Direct link to image

3 terminal connection for the voltage regulator.
Direct link to image

6 terminal connection that connects to the tail light and rear turn signals.
Direct link to image

Flat 3 terminal connection for the voltage rectifier. The flat connector pictured is no longer available. You may reuse your original connector, or fit the individual insulators provided.
Direct link to image

2 terminal connection for the voltage rectifier.
Direct link to image

19747120: Main harness for the V35 III / V50 III.
Direct link to image